Airframe Parts - Cowling |
|
|
1
| 2
Next >
|
|
|
|
|
 |
MC-1B NOSE COWLIdentical in shape and dimensions as the MC-1A cowl except, it is manufactured as a one piece unit for those who prefer a cleaner front end. View more details |
| 05-01181 | FIBERGLASS NOSE COWL MC-1B | $72.50 | 
| |
|
|
|
MC-3A NOSE COWLSuitable for just about any Lycoming powered aircraft, this cowl comes equipped with a bump that conceals the starter motor. It is the standard Pitts Special cowl but has been installed on these aircraft: Mong, Miniplane, Playboy, Emeraude, Playmate, Baby Ace, Junior Ace, EAA Bipe, Baby Great Lakes, Skyhopper and the Falconar F-11 & 12 series. View more details |
| 05-01183 | FIBERGLASS NOSE COWL MC-3A | $90.75 |
| |
|
 |
MC-7 NOSE COWL This nose cowl was designed for the T- 18 pressure cowl system. A 4-inch prop extension is required and it is generally used with the MC-5 Bottom Cowl. View more details |
| 05-01176 | FIBERGLASS NOSE COWL MC-7 | $90.75 |
| |
|
|
MC-2 NOSE COWLThis design can be used with most any Continental or Lycoming engine. Used on the original Smith Miniplane but has been installed on the Pitts, EAA Bipe, Playboy, Flybaby & Baby Great Lakes. Measures 35 View more details |
| 05-01182 | FIBERGLASS NOSE COWL MC-2 | $91.25 |
| |
|
|
 |
MC-1A NOSE COWLStyled after the Piper Comanche, this cowl can be used on just about any homebuilt powered by the Lycoming engine. It is made in two parts, allowing the easy removal of the cowl without having to remove the prop. View more details |
| 05-01180 | FIBERGLASS NOSE COWL MC-1A | $72.50 |
| |
|
 |
SPADESSpades used on aerobatic aircraft like Pitts Special. Comes with arm and plate. View more details |
| 05-00917 | RAVEN SPADES | $178.95 |
| |
|
|
 |
MC-3C NOSE BOWLIdentical to the MC-3B, but, has an opening for an oil cooler. Measures 35 inch wide by 21 inch high. View more details |
| 05-01186 | FIBERGLASS NOSE COWL MC-3C | $95.50 |
| |
|
|
MC-3B NOSE COWLSame shape and size as used on the Piper PA-14. Can be used on the same aircraft as listed for the MC-3A design. For builders not wishing to use an electrical system and is seen on most Pitts S... View more details |
| 05-01184 | FIBERGLASS NOSE COWL MC-3B | $89.50 |
| |
|
|
 |
MC-10 NOSE BOWLFor installation on Tailwind or Cougar. Used with 4 inch prop extension. Shape rounds out the boxy appearance of the standard design. View more details |
| 05-01185 | FIBERGLASS NOSE COWL MC-10 | $95.50 |
| |
|
|
MC-6 NOSE CHEEKSFrom the latest design of John Thorp, this is a 2 piece cowl used on the T- 18. Can be adapted to most homebuilts where the builder wishes to use cheeks. They have been installed on the Midget Mustang as well as the Miniplane. Makes a fine nose section. View more details |
| 05-01213 | FIBERGLASS NOSE CHEEKS MC-6 | $58.50 |
| |
|
|
|
MC-5 BELLY PAN Designed to work in conjunction with the MC4 Nose Cowl. This is the most popular combination being used today and it gives your T-18 all the compound curves and beauty it deserves. View more details |
| 05-00025 | FIBERGLASS BELLY PAN MC-5 | $77.25 |
| |
|
|
|
MC-4 NOSE BOWLThis nose cowl was designed for the T-18 pressure cowl system. A 4-inch prop extension is required and it is generally used with the MC-5 Bottom Cowl. View more details |
| 05-00551 | * FIBERGLASS NOSE COWL MC-4 | $89.50 |
| |
|
|
|
 |
BONAZA NOSE GEAR BRACEThese PMA approved replacements for the Nose Gear Brace are used in early Bonanzas. Most of these aircraft have severely corroded nose gear braces as a result of lightening holes that allow moisture to enter and collect in the bottom of the housing. Even dry country aircraft are found to have corrosion. This is because many of these aircraft have been repainted and paint remover has entered the housing and is reactiviated when water enters the housing during aircraft washing. View more details |
| 05-02463 | BONANZA NOSE GEAR BRACE | $3895.00 |
| |
|
|
1
| 2
Next >
|
|
